WEBVTT

00:00:01.300 --> 00:00:05.514
Open Security. The controls here protect access to your TraderLobby identity. We

00:00:05.514 --> 00:00:09.727
will look at three sign-in tools: a password, an authenticator app, and

00:00:09.727 --> 00:00:13.941
a passkey. They have different jobs. You do not need to change

00:00:13.941 --> 00:00:16.750
any of them just to follow the explanation.

00:00:17.250 --> 00:00:20.950
Start with Change Password. The form asks for the current password, the

00:00:20.950 --> 00:00:24.650
new password, and confirmation of the new password. Confirmation means entering the

00:00:24.650 --> 00:00:28.350
new value again so the app can check that the two entries

00:00:28.350 --> 00:00:32.050
agree. Apply submits the request. A successful result displays Password updated. If

00:00:32.050 --> 00:00:35.750
the form reports an error, read it and resolve that issue instead

00:00:35.750 --> 00:00:37.600
of assuming the change was saved.

00:00:38.100 --> 00:00:41.587
Choose a unique password that you do not use for other accounts.

00:00:41.587 --> 00:00:45.074
A password manager can help you create and keep it. Follow the

00:00:45.074 --> 00:00:48.561
requirements shown by the actual password flow; changing a password while signed

00:00:48.561 --> 00:00:52.048
in and resetting a forgotten password are different routes. If you cannot

00:00:52.048 --> 00:00:55.535
provide the current password, the forgotten-password route is the relevant one to

00:00:55.535 --> 00:00:58.150
inspect. Do not guess repeatedly in the change form.

00:00:58.650 --> 00:01:03.531
Next, find Multi-factor authentication and Authenticator app. Multi-factor authentication, often shortened to

00:01:03.531 --> 00:01:08.412
MFA, adds another check to the sign-in process. In this flow, an

00:01:08.412 --> 00:01:13.294
authenticator app generates a short code that changes over time. That code

00:01:13.294 --> 00:01:18.175
is separate from your password and separate from an email verification code.

00:01:18.675 --> 00:01:22.410
If setup is available and you intentionally choose to enable it later,

00:01:22.410 --> 00:01:26.145
Set up MFA begins the process. Add the displayed account to your

00:01:26.145 --> 00:01:29.881
authenticator by scanning its setup code, or use the setup-key option if

00:01:29.881 --> 00:01:33.616
scanning is not possible. Then enter the authenticator's current six-digit code in

00:01:33.616 --> 00:01:37.351
TraderLobby and choose Confirm and enable. Opening the setup screen alone does

00:01:37.351 --> 00:01:40.775
not complete enrollment. Look for Enabled and the successful completion message.

00:01:41.275 --> 00:01:45.457
Treat the setup image and setup key as private. They are not

00:01:45.457 --> 00:01:49.640
decorative pictures to share in a support post. After successful setup, the

00:01:49.640 --> 00:01:53.822
app displays recovery codes. Those deserve their own careful step, which we

00:01:53.822 --> 00:01:58.004
will cover on the next page. Do not disable MFA simply to

00:01:58.004 --> 00:01:59.050
repeat the demonstration.

00:01:59.550 --> 00:02:03.655
Finally, find Passkeys. When this feature is configured for the environment and

00:02:03.655 --> 00:02:07.761
supported by your device, Add a passkey starts a device sign-in setup.

00:02:07.761 --> 00:02:11.866
Your device may ask for its PIN, a biometric check, or a

00:02:11.866 --> 00:02:15.971
security key. Approve only the setup you intentionally started. Look for Passkey

00:02:15.971 --> 00:02:19.050
added and the updated list before considering it complete.

00:02:19.550 --> 00:02:24.082
If passkeys are unavailable, read the explanation and keep using the supported

00:02:24.082 --> 00:02:28.614
sign-in route. If a device prompt is canceled or fails, that is

00:02:28.614 --> 00:02:33.146
not proof a passkey was saved. Removing a listed passkey changes an

00:02:33.146 --> 00:02:37.300
access method, so keep another working method available before considering removal.

00:02:37.800 --> 00:02:42.300
Your check is to locate the password form, authenticator status, and passkey

00:02:42.300 --> 00:02:46.800
area. Explain what confirms each successful setup. You do not need to

00:02:46.800 --> 00:02:51.300
enter a password, scan a setup image, or remove any protection to

00:02:51.300 --> 00:02:52.425
complete this page.